Description
The kettle body and kettle cover of synthesis reactors are sealed by durable and reliable line seal structure with long-term stability to leak free seal.
Features:
- Thickening processing PTFE cover, not easy to soften.
- Beautiful appearance, reasonable structure and easy to operate.
- With PTFE liner, double care, acid and alkali, resistant to high temperature of 200 ℃.
Specification:
- Model: ATO-KH-200
- Capacity: 200ml
- Material: 304 stanless steel, PTFE chamber
- Maximun Pressure: 3 MPa
- Safe Working Temperatue: 200 ℃
- Heating and Cooling Rate: ≤5 ℃/min
- Net Weight: 5kg
- Dimension: 110*200 mm (φ*H)
Structure:
Application:
Tips: How to Clean Hydrothermal Synthesis Reactor?
- Rinse with distilled water. After each use, rinse the hydrothermal synthesis reactor with distilled water to remove any residual chemicals or samples. Use a sufficient amount of distilled water to thoroughly rinse the inner walls and the bottom of the reactor.
- Soak in detergent solution. Prepare a detergent solution by dissolving a mild detergent in distilled water. Place the hydrothermal synthesis reactor in the detergent solution and let it soak for at least 30 minutes to loosen any stubborn residue.
- Scrub with a soft brush. After soaking, use a soft brush, such as a nylon brush or a sponge, to scrub the inner walls and the bottom of the hydrothermal synthesis reactor. Be gentle to avoid scratching the reactor’s surface.
Reviews
There are no reviews yet.