Description
High voltage capacitor with direct plug installation type, the size is 6.3*11 mm, 3000 hours endurance, operating tempertaure -40~105℃. Power capacitor providing good electrical performance, wide application range and high reliability.
Features
- Endurance: 105℃- 2000 hours up to 5000 hours
- Low impedance and high ripple current
- High reliability
- Wide voltage range
Specification
| Model | ATO-EC-KF101M035F | |
| Series | Low impedance 105°C type | |
| Capacity | 100 ㎌ | |
| Rated voltage | 35V | |
| Installation Type | Direct plug | |
| Size | 6.3*11 mm | |
| lead spacing | 2.5 mm | |
| Operating temperature | -40~105℃ | |
| Cap. tolerance (∆C) | ±20% (120Hz 20℃) | |
| Dissipation factor (tanδ) | 10% | |
| Low temperature characteristic at 120Hz (Z ratio max.) | 3 (Z-25℃/ Z+20℃) | |
| Leakage current (Lleak) | ≤0.01*CR*VR or 3 ㎂ * after 2 minutes | |
| Enduarance (105℃) | Test | 3000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value | |
| Shelf life (105℃) | Test | 1000h |
| ∆C | ≤20% of initial measured value | |
| tanδ | ≤200% of specified measured value | |
| Lleak | ≤ the specified measured value |
Dimension (mm)
| Model | Dimension (mm) | |
| KF101M035F | ∅D | 8 |
| F | 3.5 | |
| ∅d | 0.5 | |
| a | 1.5 |
Tips: How to Choose Aluminum Electrolytic Capacitor?
The voltage that the capacitor actually has to withstand in the circuit cannot exceed its withstand voltage value. In the filter circuit, the withstand voltage value of the capacitor should not be less than 1.42 times the RMS value of the AC. When using electrolytic capacitors, be careful not to reverse the positive and negative poles.
Different circuits should use different types of capacitors. Mica, high-frequency ceramic capacitors can be used for the vibration circuit, paper, polyester, mica, electrolytic, ceramic capacitors can be used for DC blocking, electrolytic capacitors can be used for filtering, and polyester, paper, ceramic, electrolytic capacitors can be used for bypass.
Before installing the capacitor into the circuit, check whether it has short circuit, open circuit and leakage, and check its capacitance value. When installing, make it easy to see symbols such as the type, capacity, and withstand voltage of the capacitor for verification.
Reviews
There are no reviews yet.