Description
550mm Arm Length, 1kg Load 4 Axis SCARA Robot features fast motion performance, lightweight and compact mounting conditions. The small and refined size is suitable for the automation of various processes, and its advantages are particularly obvious in a limited production space.
Specifications
| Model | ATO-TS5-500 | |
| Number of Axis | 4 | |
| Full length | 500mm | |
| First arm | 200mm | |
| Second arm | 300mm | |
| Rated load | 6kg | |
| Max. load | 8kg | |
| Axis 4 moment of inertia | 0.06kg.m2 | |
| Working Envelope | Axis 1 | ±120° |
| Axis 2 | ±150° | |
| Axis Z | 210mm | |
| Rotation | ±360° | |
| Repeated Positioning Accuracy | X-Y | ±0.02mm |
| Axis 3 | ±0.02mm | |
| Axis 4 | ±0.02mm | |
| Max. Speed | Max. end speed | 7m/s |
| Max. end acceleration | 56m/s2 | |
| Arm Weight (excluding electric control box, and extension cord) | 26kg | |
| Power Supply | Single phase AC 220±10%, 50/60Hz | |
| Total power | 1.5kW | |
| Noise | ＜85dB | |
| Equipped Cables | 15*0.2mm2 | |
| Tracheal Interface | Φ6*2 | |
| Max. trachea input | Positive pressure | 8kg/cm2 |
| Negative pressure | 1kg/cm2 | |
| Environmental Requirements | Temperature | 5℃-40℃ |
| Humidity | 10%-80% (no condensation) | |
| Installation Method | Vertical mount |
Note:
*Using ATO SCARA robots requires more robot programming knowledge and automation equipment experience.
*You can install it yourself after buying our robot.
*If you have not used similar equipment before and need more buying guides, please feel free to contact us.
Tips:
The SCARA robot is a high-speed running equipment, and its maximum turning radius will change due to the size of the jig installed at the end or the size of the gripping workpiece. Before running the machine, make sure that there are no obstacles in the operating range of the robot arm to avoid collision and damage to the machine. When the machine is running, the operator should always pay attention to the movement range of the robot arm to avoid injury.
When the robot arm moves, the control system will generate a certain temperature. The control box is equipped with a cooling fan. The operator needs to pay attention to whether the fan is running normally and the cooling holes of the control box are not blocked. Avoid alarm and shutdown when the temperature in the control box is too high.
Reviews
There are no reviews yet.