Description
Features
- 100% helium leak tested to 1 x 10
- WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- All stem threads are rolled for strength and ease of operation
- ml/s for guaranteed performance and reliability 10,000 psi hard seat pressure rating at 200 ºF
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite (800 Series only) packing optional
- Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve (U.S. Patent 7,758,014)
- 0.159″ bleed port
- -4
- These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.’s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
- Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are 1″ round knurled handles (HL3) on brass, and 1-3/8″ mini “T” handles (HL7) on stainless steel and steel. The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL7) on the 802-MC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests. All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.
Reviews
There are no reviews yet.