6″ Resilient Wedge Gate Valve

Description

Note: This gate valve cannot be used for drinking water.

A resilient seated wedge gate valved has a 6″ (DN 150) nominal pressure of 1.6 MPa. The wedge type gate valve has a corrosion resistant body and a resilient wedge made of a resilient material to handle a variety of fluids including water, oil and gas.

Specification

• Model: ATO-WGV-150
• Nominal Diameter: 6″ (DN150)
• Nominal Pressure: 1.6 MPa
• Control Mode: Manual control
• Manual Operation: Switching handle (turbine)
• Connection: Flange
• Operating Range: 0-90°
• Material of Valve Body: Cast iron
• Material of Valve Plate: Cast iron
• Seat Seal: PTFE
• Media: Water, liquid, gas, oil, powder, steam, etc.
• Weight: 134kg

Features

• 6″ wedge gate valve features a gate with a wedge shape that allows for a tight seal when the valve is closed.
• DN 150 wedge gate valve has a full bore design, which means that the inside diameter of the valve is the same as the pipe it is connected to. This helps to minimize pressure drop and turbulence.
• The flexible gate valve is designed to allow for bi-directional flow, which means that fluid can flow through the valve in either direction.
• Wedge gate valves are capable of withstanding high pressures, making them ideal for use in applications where high pressures are present.
• When the valve is fully closed, the wedge gate provides a tight seal that prevents fluid from leaking through the valve.

Dimension (Unit: mm)