Description
Three phase 380V internal concrete vibrator motor, 6 pole, rated speed 2840rpm, high quality and safety guarantee. Cheap price, manufacturer direct sales and use for construction.
3kW Internal Concrete Vibrator Motor
| Model | ATO-ZN-100 |
| Power | 4hp (3kW) |
| Phase | 3 phase |
| Voltage | 380V |
| Speed | 2840rpm |
| Number of Pole | 6 Pole |
| Size | 320 * 180 * 280mm |
| Weight | 16kg |
| Type | Internal |
| Warranty | One year for machinery |
| Application | Construction industry |
| Drive Mode | Electric vibrator |
| Certification | CCC |
| Installation Method | Make sure the voltage and frequency supply match the ones indicated on the rating plate of the electric vibrator. Insert the power cable through the cable gland. |
Detail of Internal Conrete Vibrator Motor
Tips: How to maintain and repair the internal concrete vibrator motor？
- After the vibrator is used, the outer surface of the vibration must be carefully cleaned to ensure good heat dissipation during the next operation of the motor.
- The sealing and insulation of the motor should be checked frequently. If the vibration is found to be damp, it must be dried.
- Check whether the power line and switch connector are firm and safe.
- The bearing on the motor should be cleaned regularly and replaced with grease.
- Check the damage of other parts regularly, and repair in time if found.
- If the insulation resistance is above 2mq, the stator should be dried.
- The grounding wire is firm and reliable and must be checked regularly. Before using the power supply, there should be leakage protection switch, which must be tested regularly.
- In case of vibration and electrical fault, a full-time electrician must repair it.
Reviews
There are no reviews yet.