Description
24V momentary push button switch Protection grade IP65, the color of the lamp beads can be red, yellow, blue, green and white, 1 NO + 1NC, 2 NO + 2NC can be customized.
Specification:
| Modle | ATO-PBS-24V |
| LED Lamp Voltage | 24V |
| Installation Size | 22mm |
| Action Form | Reset/Self-lock |
| Contact Combination | 1 NO + 1 NC, 2 NO + 2 NC (Can be customized) |
| Wiring | Insert |
| Rated Capacity | 250V/3A, 12V/5A, 24V/3A |
| Lamp Bead Color | Red, yellow, blue, green, white |
| Explosion Proof Grade | IK08 |
| Protection Level | IP65 |
| Temperature Range | -25℃~80℃ |
| Operating Pressure | 3N~5N |
| Shell Material | Stainless Steel |
| Button Material | PC Plastic |
| Internal Moving Contact | Silver Alloy |
| Base Material | Nylon PA66 |
| Nut Material | Copper Nickel Plated |
| Mechanical Life | 1 Million Times |
| Electrical Life | 200,000 Times |
| Weight | 22.8g |
| Warranty | 12 Months |
12V Waterproof Momentary Push Button Switch Dimension (unit: mm)
Momentary Push Button Pin Circuit Arrangement Diagram
How to choose Momentary Push button Switch?
1. According to the different use occasions and specific purpose: select the type of button according to the use occasion, such as open type, protective type, waterproof type, anti-corrosion type, etc.; select the appropriate form according to the use, such as handle rotary type, key type , Emergency, with light, etc. For example, the general button on the panel of the console cabinet can be opened first; if you need to display the working status, use the indicator type; in very important places, in order to prevent unrelated personnel from misoperation, the key type should be selected; when there is corrosive gas Use anti-corrosion type.
2. Select the color of the buttons and indicator lights according to the requirements of working status, instructions and working conditions: green for starting or energizing, and red for “stop”. In addition, the voltage of the indicator light (bulb) is divided into 5V, 12V, 24V and so on.
3. According to the needs of the control loop, determine the number of different buttons: such as single button, double button, three button, multi button, etc. For example, when three kinds of control of forward and reverse stop are required, three buttons can be used and installed in the same button box; when only start and stop control are needed, two buttons are assembled in the same button box.
Reviews
There are no reviews yet.