Description
Dual voltage arc welder output current with 10-50A, suitable for welding stainless steel, mild steel, aluminum and other metal material, ATO welding supplies manufacturer direct sales.
Specifications
| Model | ATO-WM-LTP5000D |
| Output Power | DC |
| Input Voltage | 110V/220V, +/15%, 1-PH, 50Hz/60Hz (Automatic dual frequency) |
| Input Current | 240V, 1-PH, 20A |
| Output Current | 10-50A |
| Power | 7.1 kVA |
| Power Factor | 0.73 |
| Duty Cycle at 40℃ (104℉) | 60% at 50A, 240V |
| Dimension | 381mm*152.4mm*340.8mm |
| Weight | 11.8kg |
| Cutting Material | Mild Steel, Stainless Steel, Aluminum, etc |
| Welding Thickness | 1/2″ |
| Gas Supply | Clean, Dry, Oil-Free Argon |
| Color | Red |
| Warranty | 12 Months |
| Input Power Cable Length | 6′ (1.8m) |
| Max Severance Thickness | 3/4″ |
| Recommender Gas Inflet Flow Rate/Pressure | 3.6scfm at 65psi |
| Accessories | Pilot Arc Plasma Torch ( 9’5″) |
| Plasma Consumables (installed on the torch head) | |
| Air Filter/Regulator | |
| Ground Clamp&Cable | |
| Connections, (like air house etc.) | |
| User Manual |
Cut Chart
| Material | Thickness | Current | |
| inches | mm | amps | |
| Mild Steel | 10 gauge | 3 | 50 |
| 1/4 | 6 | 50 | |
| 3/8 | 10 | 50 | |
| 1/2 | 12 | 50 | |
| 5/8 | 16 | 50 | |
| Stalinless Steel | 10 gauge | 3 | 50 |
| 1/4 | 6 | 50 | |
| 3/8 | 10 | 50 | |
| 1/2 | 12 | 50 | |
| Aluminum | 1/8 | 3 | 50 |
| 1/4 | 6 | 50 | |
| 3/8 | 10 | 50 | |
| 1/2 | 12 | 50 |
Features:
1. 10-50 Amp AC/DC square-wave inverter TIG/Stick (MMA) welder.
2. Automatic dual voltage/ dual frequency (110/220Volt 50/60Hz).
3. High frequency start hand torch control and precise foot pedal welding heat control.
4. Suitable for welding stainless steel, mild steel, aluminum and other metal materials.
Accessories
Structure
Tips: What is The Difference Between AC Welding Machine and DC Welding Machine?
The output current is used to distinguish AC and DC. The more important weldments (such as boilers, pressure vessels and alloy structural steels) generally use DC welding machine, which has beautiful weld formation, stable arc, small splash, low air consumption, and general welding. The DC welding machine for alkaline welding rods has good crack resistance and mechanical properties, but the process performance is poor. The AC welding machine mainly welds low carbon steel and low strength low alloy structural steel. Generally, it is welded by welding acid electrode. The acid electrode can be used for both AC and DC, and the welding process performance is good, but the mechanical properties of the weld, especially the impact toughness is poor. The price of the DC welder equipment is slightly higher than that of the AC welder, and the durability is slightly poor and the maintenance cost is high.
Reviews
There are no reviews yet.