Description
Dual inline package switch (DIP switch) is designed to hold configurations and select the interrupt request for motherboards or breadboard. This small DIP switch with 6 push buttons also can be used to activate or deactivate different electronic circuits.
Specification
| Model | ATO-DIP-6P | |
| Spacing | 2.54mm | |
| Number of Switch | 6 | |
| Number of Pin | 12 | |
| Maximum Operating Force | 8N | |
| Push Button Stroke | 2mm | |
| Operating Temperature | -20℃~+70℃ | |
| Storage Temperature | -40℃~+85℃ | |
| Contact Resistance | Initial Value: 50MΩ, After Test: 100MΩ | |
| Insulation Resistance | 100MΩ, 500VDC | |
| Compressive Strength | 500VAC/1min | |
| Interpolar Capacitance | 5pF | |
| Loop | SPST (Single Pole Single Throw) | |
| Electrical Life | Tested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times | |
| Rated Current | Does not Switch Frequently | 10mA, Withstand Voltage 50V DC |
| Switch Frequently | 25mA, Withstand Voltage 24V DC | |
| Weight | 0.1kg |
Dimensions (Unit: mm)
Tips: Different types of DIP switches
- Half-spacing type
The pin spacing is half of the normal DIP switch, that is 1.27mm. The main features are small size and occupy less space on the circuit board. It is suitable for use on micro-precision equipment. - DIP flat type
The pin spacing is 2.54mm. It adopts the direct insertion type (DIP) and the flat type, belonging to two states. The strength of the actuator is up to 800gF in each series, and the working temperature is -40 to 85 degrees, which is suitable for industrial grade. - DIP sliding type
The pin spacing is 2.54mm, and the sliding in-line switch is two states. The temperature range is -40 to 85 degrees, suitable for industrial grade. - DIP key type
Pin spacing is 2.54mm, top dial in-line (DIP), two states. The protruding part of the actuator is only 0.9mm. Gold-plated contacts, strong reliability. The stroke of the actuator is only 0.9mm, and the temperature range is also suitable for industrial grade. - DIP ultra-thin sliding type
Pin spacing is 2.54mm, top dial in-line (DIP), two-state, sliding type. Gold-plated contacts, strong reliability. Suitable for precision instruments. - DIP key convex type
Pin spacing is 2.54mm, top dial type (DIP), two-state, key type. The contact part is a gold-plated contact, and the self-cleaning structure of the operation ensures high reliability. Suitable for operating equipment up and down.
Reviews
There are no reviews yet.