Description
Multi-functional precision digital LCR bridge with affordable price, equipped with 4.3-inch color TFT screen, 32-bit processor core. Test voltage or current automatic level control of ALC function, meet the demand of various occasions component parameter detection. It Is really a kind of high cost performance products tester.
Specification
| Model | ATO-LCRM-2816 |
| Test Specifications | |Z|, |Y|, C, L, X, B, R, G, D, Q (deg), θ (Rad) |
| Test Frequency | 50Hz~200kHz total of 37 frequency points |
| Basic Test Accuracy | 0.05% |
| Equivalent Circuit | Series, parallel |
| Mathematical Function | Absolute value deviation, △% |
| Range Mode | Auto, Hold, manual |
| Trigger Mode | Internal, Manual, External, Bus |
| Measurement Speed (≥1kHz) | Fast: 75 time/second, Med: 12 time/second, Slow: 3 time/second |
| Averaging Rate | 1—255 |
| Delay Time | time 0—60s, n 1 ms step by step |
| Correction Function | Open, short, load |
| Test Configuration | 5 ports |
| List Sweep | 4 points |
| Display Mode | Direct, Δ, Δ%, V/I (V/I monitor) |
| Display | 6 resolution, 4.3 Inch LCD monitor |
| Output Impedance | 30 Ω, 100 Ω selectable |
| Power Requirements | 110V~240V |
| Test Level | Normal: 5mV－2V, Accuracy: 10%, with step of 1 mV Constant level: 10mV－1V, Accuracy: 5%, with step of 1mV |
| DC Bias Source | 0V, 1.5V, 2V, Accuracy: 1% (customization) |
| Display Range | |Z|, R, X: 0.01mΩ—99.9999MΩ DCR: 0.001mΩ—99.9999MΩ |Y|, G, B: 0.00001µS—99.9999S C: 0.00001pF—9.9999F L: 0.00001µH—9999.99H D: 0.00001—9.9999 Q: 0.00001—9999.9 θ (DEG): -179.999º—179.999º θ (RAD): -3.14159—3.14159 |
| Comparator Function | 10 bins: 9 pass bin, 1 fail bin, AUX bin |
| Certification | CE |
| Memory | 100 control setting memory for store/recall, Outside of 500 |
| Interface | RS232C, USB HOST, USB DEVICE |
Panel Details
Dimension Drawing
Tips: Mode selection for LCR meter when measuring inductance.
Low impedance devices use series mode, the calculation accuracy will be high. Large impedance devices use parallel mode, the calculation accuracy will be high. If the impedance is greater than several hundred k or M, use parallel mode. In addition, when testing devices with small inductance and capacitance, increasing the test frequency appropriately can improve test accuracy. In practical applications of LCR meters, series mode is used more often.
Total impedance is greater than 10kΩ, use parallel mode.
Total impedance is less than 10Ω, use series mode.
Total impedance is between 10Ω and 10kΩ, measure according to measurement requirements of the LCR meter product manual.
Reviews
There are no reviews yet.