Description
Linear slide table is driven by ball screw of 16mm diameter, optional stroke 100mm~1050mm, screw path 5/10/20mm. The linear motion system integrates guide rail and sliding block. For better control, you can buy a servo motor to match the linear slide system.
Basic Specification
| Model | ATO-ATH8 | |||
| Stroke | 100mm~1050mm (100mm pitch) | |||
| Ball Screw Diameter | 16mm | |||
| Repeatability Accuracy | ± 0.01mm | |||
| Ball Screw Lead | 5mm | 10mm | 20mm | |
| Max. Speed | 225 mm/s | 450 mm/s | 900 mm/s | |
| Max. Payload | Horizontal | 50 kg | 30 kg | 18 kg |
| Vertical | 15 kg | 8 kg | 3 kg | |
| Rated Thrust | 683/1388 N | 341/694 N | 174/347 N | |
| Matching Servo Motor Power* | 200W | |||
| Coupling | 10*11 (14)mm / 10*14mm | |||
| Home Sensor | Outside | EE-SX674 (NPN) |
*Note: The servo motor is not included in packing list, if you need one, please contact us.
Speed Chart
| Model | Body Width (mm) | Ball Screw Lead (mm) | Max. Payload (kg) | Max. Speed (mm/s) | Standard stroke and recommended use of the highest speed (mm/s) | |||||||||||
| Horizontal | Vertical | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1050 | ||||
| ATO-ATH8 | 82 | 5 | 50 | 15 | 225 | – | – | – | – | – | – | – | 225 | 175 | 125 | 100 |
| 10 | 30 | 8 | 450 | – | – | – | – | – | – | – | 450 | 350 | 250 | 200 | ||
| 20 | 18 | 3 | 900 | – | – | – | – | – | – | – | 900 | 700 | 500 | 400 |
Note: The highest speed is based on the maximum speed of servo motor (3000 rpm).
Features
- The ball screw linear slide table is a highly integrated linear motion system. The aluminum body is integrated with guide rail, and the slide block and the slide table are integrated.
- Linear slide guide rail is compact, lightweight, space-saving and high-load.
- The linear slide system is made of U-shaped high-strength aluminum alloy. The built-in stainless steel guide rail and the base are integrally formed. The guide rail groove adopts 2 rows 45° contact angles, providing equal load capacity in 4 directions. High precision and high rigidity can be achieved through proper steel ball preload.
- Fully sealed design, low dust generation during operation, so that the whole linear motion system can meet the requirements of dust-free level.
- The linear slide table of this series adopts ball screw, with high transmission repeatability, up to ±0.005.
Motor Mounting Dimensions (Unit: mm)
| Motor Power | Motor Size | Shaft Diameter |
| 200W | 60mm | 11mm |
Reviews
There are no reviews yet.