Finish Thompson High Flow Pump – Tefc Motor – Polypropylene Pump Tube 1/2 hp, 110 volts, 50/60 Hz, single-phase

Description

Finish Thompson High Flow Pump – Tefc Motor – Polypropylene Pump Tube – 8PFP-E1

Continuous-duty rated for aggressive liquids Polypropylene, 316 stainless or PVDF models Designed for free-flowing liquids up to 2,000 cPs viscosity and 1.8 specific gravity. 40″ long pump tube fits 2″ bung opening. The seal-less design has a 30-minute run-dry capability without damage. Features double suction impeller. Polypropylene and Kynar® pumps have convenient variable orifice discharge fitting. Totally Enclosed Fan Cooled Motor (TEFC) is designed for corrosive environments. 1/2 hp and 1 hp, double insulated, 110 volts, 50/60 Hz, single-phase. The handle has a built-in switch, thermal overload protection with manual reset, 12′ cord with plug. 1 hp motor includes speed regulator for precise adjustment of fluid flow. Open Drip-Proof Motor (ODP) is designed for non-corrosive environments. 1/2 hp, 110 volts, 50/60 Hz, single-phase. The handle has a built-in switch, thermal overload protection with manual reset, 12′ cord with plug. Explosion-Proof Motor (EP) is 1/10 hp, double insulated, 110 volts, 50/60 Hz, single-phase, with 12′ three-wire cord without a plug. CSA-Listed for Class I, Division I, Group D. Air Motor (Air) develops 1/2 hp, uses 17 – 25 CFM @ 50 – 80 psi. Supplied with a regulator valve and muffler. All pumps in this series have a 1″ hose barb. Note: When pumping flammables, use only a stainless steel pump tube with an explosion-proof motor and be sure to use a static protection hose kit found in Accessories for Finish Thompson Pumps. Containers will also require grounding. See Bonding and Grounding Wires.s

Shown 8PFP-E1

Features: